6ES7 924-0BB00-0AB0
TERMINAL BLOCK TP2, 2-TIER, 8 CHANNELS, FOR 2A DIGITAL OUTPUT MODULES, ConNECTION WITH FLAT RIBBON CABLE, SPRING TERMINALS
Fully modular
connection – fast
field connections
Modular “building block” provides the fastest
and most efficient system cabling
The fully modular connections link sensors and actuators
in the field to a SIMATIC S7 simply, quickly, and securely.
The connection consists of front connector modules for
the S7-1500 and S7-300, connecting cables and connection
modules to replace conventional terminal blocks with
additional functions for voltage and performance adaptation.
• Reduces wiring errors and testing times
• Uniform, clear connections
• No mix-up of individual wires
• Individual components can be replaced more quickly
and easily
• Up to 80% less wiring outlay
The flexible connection:
simple wiring in the
control cabinet
Clearly bundled individual wires
ensure full flexibility
The flexible connection enables sensors and actuators
mounted in the control cabinet to be connected to the
SIMATIC S7 more quickly and easily. To achieve this, the
front connector is prewired for connection to the digital I/O
assembly with 20 or 40 individual wires. The clearly labeled
individual cores at the other end of the wire bundle can
be routed to any element in the control cabinet.
• Bundled individual wires ensure clarity
• Connection security thanks to matching numbers printed
on wires and connecting points on the front connector
• Large cross sections make higher currents possible
• Up to 50% less wiring outlay
Cabling made easy:
SIMATIC TOP connect
To ensure constant functionality and availability of your electronic equipment, the
connections linking your individual components must be reliable and fault-free.
SIMATIC TOP connect offers an alternative solution to conventional single wiring with
terminal blocks, which is often complex, time-consuming and fault-prone.
SIMATIC TOP connect provides you with an innovative connection system for the
SIMATIC S7-1500 and S7-300 as well as for distributed I/Os SIMATIC ET 200MP and ET
200M, in two versions: the fully modular connection using the building block principle
and the flexible connection with pre-wired front connectors. The benefit for you:
both standardized cabling solutions lead to considerable time savings of up to 80%
and ensure a high wiring quality in a well-structured control cabinet. Simply a
TOP connection.
### 完全模块化连接 – 快速现场连接 模块化“积木”系统提供了最快和最有效的系统布线方式。 这种完全模块化的连接将传感器和执行器在现场简单、快速且安全地连接到 SIMATIC S7。连接由 S7-1500 和 S7-300 的前连接器模块、连接电缆和连接模块组成，这些模块取代了传统的端子块，并增加了电压和性能适应的功能。 - 减少布线错误和测试时间 - 统一的、清晰的连接 - 不会混淆单根电线 - 可以更快、更容易地更换单独的组件 - 最多减少 80% 的布线工作量 ### 灵活的连接：控制柜中的简单布线 清晰的成束单根电线确保了完全的灵活性。 这种灵活的连接使得安装在控制柜中的传感器和执行器能够更快、更容易地连接到 SIMATIC S7。为此，前连接器预先布线用于连接到带有 20 或 40 根单根电线的数字 I/O 组件。成束电线另一端的清晰标记的单根线芯可以路由到控制柜中的任何元件。 - 成束的单根电线确保了清晰度 - 由于电线和前连接器上的连接点打印了匹配的编号，连接安全性得到了提高 - 较大的横截面使得更高的电流成为可能 - 最多减少 50% 的布线工作量 ### 布线变得容易：SIMATIC TOP 连接 为了确保您的电子设备的持续功能和可用性，连接您各个组件的连接必须可靠且无故障。SIMATIC TOP 连接为传统的带有端子块的单根布线提供了一种替代解决方案，这种布线方式通常复杂、耗时且容易出错。 SIMATIC TOP 连接为您提供了两种创新的连接系统：完全模块化连接使用积木原则，以及带有预布线前连接器的灵活连接。这两种标准化布线解决方案都能节省高达 80% 的时间，并确保在结构良好的控制柜中具有高质量的布线。简单来说，就是一个 TOP 连接。